NEC NEAX 2000 IPS - Page 33

CHAPTER 1 GENERAL INFORMATION
– 19 – NWA-008853-001 Rev.3.0
97ch1001.fm
Card Name and Function
EQUIPMENT
NAME
FUNCTIONAL
NAME
FUNCTION
PZ-M537 EXPMEM Memory Expansion Card for AP00 Card
The system capacity is expanded when PZ-M537 is mounted on
PN-AP00-B (AP00) card.
PZ-M537 cannot be mounted on PN-AP00-D (AP00) card.
Memory Expansion for AP00 is shown in the table below.
PZ-M542 CONN Coaxial Cable Connection Card
Used to connect a coaxial cable for the Digital Trunk Interface.
Maximum two cards can be connected to LTC connector of each
PIM.
PZ-M557
[For
Australia]
CONN Coaxial Cable Connection Card
Used to connect a coaxial cable for the Digital Trunk Interface.
Maximum two cards can be connected to LTC connector of each
PIM.
• PN-AP00-B with AP00 program
• PN-AP00-B with MRCA program
System
Capacity
No EXPMEM With EXPMEM
SMDR call
record
Local Office of
Centralized
Billing-CCIS/
Stand-alone
Center Office
of Centralized
Billing-CCIS
Local Office of
Centralized
Billing-CCIS/
Stand-alone
Center Office
of Centralized
Billing-CCIS
1600 800 27000: Call Record for CIS is
not provided
26000: Call Record for CIS is
provided
System
Capacity
No EXPMEM With EXPMEM
SMDR call
record
Local Office of
Centralized
Billing-CCIS/
Stand-alone
Center Office
of Centralized
Billing-CCIS
Local Office of
Centralized
Billing-CCIS/
Stand-alone
Center Office
of Centralized
Billing-CCIS
2620 1965 23580 22925
JULY/01/2006
CARD NAME AND FUNCTION