NEC NEAX 2000 IPS - Page 357

CHAPTER 3 SYSTEM DATA PROGRAMMING
– 343 – NWA-008853-001 Rev.3.0
97ch3005.fm
To set call forwarding to the VMS:
• Call Forwarding-All Calls
• Call Forwarding-Busy Line
• Call Forwarding-Don’t Answer
• Split Call Forwarding-All Calls
• Split Call Forwarding-Busy Line
• Split Call Forwarding-Don’t Answer
1. Lift the handset and receive dial tone.
2. Dial the Call Forwarding or Split Call Forwarding feature access code, and receive Special Dial Tone.
3. Dial the voice mail station number and receive Service Set Tone.
The LCD shows:
[SET xxxx]
VMS: Voice mail station number
To call a station number whose call forwarding is set to the VMS:
1. Lift the handset and receive dial tone.
2. Dial the desired station number and receive ringback tone.
The LCD shows:
[FDA xxx]
VMS: Voice mail station number
3. Follow the instructions given by the VMS.
JANUARY/31/2006
VOICE MAIL INTEGRATION-CCIS