NEAX2400 ICS Business Features and Specifications
Page 72
NDA-24143, Issue 4
B-8 Boss - Secretary - Message Waiting Lamp Control
Service Conditions (cont’d)
d.) THREE-WAY CALLING [T-2]
e.) CONSULTATION HOLD - ALL CALLS [C-17]
f.) calls by VOICE CALL - D
term
[V-2D]
g.) Call Waiting Ringback Tone with Call Waiting set.
13. CALL WAITING [C-12, 13] set from any other station causes the MW Indication for the party
setting the call waiting to go off.
14. THREE-WAY CALLING [T-2] established by EXECUTIVE RIGHT-OF-WAY - D
term
[E-1D]
causes the MW Indication connected to the interrupted party to go off when the interrupting party
presses the “MW CNCL” button. When using a soft key, press the “MW OFF” to cancel.
Interactions
1. Use of the following features has no effect on this feature. BOSS-SECRETARY MW LAMP
CONTROL can be set/cancelled to a station that has previously activated any of the following
features:
a.) DO NOT DISTURB - D
term
[D-21D]
b.) CALL BACK - D
term
[C-1D] set to boss’ station
c.) CALL BACK - D
term
[C-1D] set from boss’ station
d.) CALL FORWARDING ALL CALLS - D
term
[C-5D] will not follow forwarding data
e.) CALL FORWARDING NO ANSWER - D
term
[C-3D] will not follow forwarding data
f.) CALL FORWARDING BUSY - D
term
[C-2D] will not follow forwarding data.
2. When the boss’ line is answered by the secretary, the following services may be activated either
by the secretary or by another station towards the secretary. These services will not interfere with
the secretary’s ability to set/cancel MW.
a.) PRIVACY - D
term
[P-14D]
b.) CONSULTATION HOLD - ALL CALLS [C-17]
c.) CALL WAITING - ORIGINATING [C-31] set to boss’ station
d.) CALL WAITING - ORIGINATING [C-31] set from boss’ station
e.) ATTENDANT CAMP ON WITH TONE INDICATION [A-1] set to boss’ station
f.) THREE-WAY CALLING - D
term
[T-2D]
g.) NON-EXCLUSIVE HOLD - D
term
[N-7D], EXCLUSIVE HOLD - D
term
[E-4D] or DUAL
HOLD [D-32].
To Next Page
Loading...
