NEAX2400 ICS Business Features and Specifications
Page 298
NDA-24143, Issue 4
L-10 LCR - Time Of Day Routing
L-10 LCR - Time Of Day Routing
General Description
This feature provides automatic routing of outgoing calls over alternative customer facilities, based on the
destination code. The system will select the most economical route available at the time of connection.
The pattern of alternate routing can be changed up to 8 times per day, based on a prearranged time
schedule.
Operating Procedure
To operate:
a.) Lift the handset; receive Dial Tone.
b.) Dial the trunk access code (usually “9”); receive second Dial Tone.
c.) Dial the area code, office code, and subscriber number.
d.) The system automatically completes the call via the most economical route available.
Service Conditions
1. A maximum of 8 patterns can be provided during a 24-hour interval for LCR - TIME OF DAY
ROUTING.
2. Each pattern can be programmed at a maximum increment of 30 minutes.
Interactions
1. For each Time-of-Day Change, the entire AOPR and ASDC tables must be created. Caution
should be exercised to use data memory economically.
2. LEAST-COST ROUTING-3/6 DIGIT [L-5] must first be provided.
To Next Page
Loading...
