NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 295
Line Reconnect - Same Line - D
term
L-7D
L-7D Line Reconnect - Same Line - D
term
General Description
This feature allows a station user to disconnect a call and receive Dial Tone by pressing the “RCL” key.
Operating Procedure
While a call is in progress:
1. Press the “RCL” key; disconnect and receive Dial Tone on the same line.
2. User is ready to dial again.
Service Conditions
1. Conflicting service features are: CALL TRANSFER - ALL CALLS [C-11], CONSULTATION
HOLD - ALL CALLS [C-17] and CALL HOLD [C-6]. Pressing “RCL” key will result in reconnection
of the held line.
2. System should be programmed to provide for First Party Release.
3. If the system is not programmed for First Party Release and programmed as Calling, Called, or
Both Party Release, a release guard is activated. If a party is not allowed to terminate a call and
presses “RCL” key, that station remains connected to the original call.
To Next Page
Loading...
