NEAX2400 ICS Business Features and Specifications
Page 370
NDA-24143, Issue 4
M-101 MF ANI to SMDR
M-101 MF ANI to SMDR
(Series 6100 software feature)
General Description
This feature allows an office receiving ANI information by means of MF signal to output the information to
the expanded SMDR area.
Operating Procedure
No manual operation is required.
Service Conditions
1. Output conditions are same as current conditions of MF ANI. (i.e., charging information for
incoming calls is output only).
2. About the expanded output format, refer to SMDR OUTPUT EXPANSION - ANI/CPN [S-129].
3. When the tandem connection is established through CCIS, the maximum digits of ANI
information output to the SMDR port are 16.
To Next Page
Loading...
