NEC NEAX 2400 ICS - Call Forwarding - Dont Answer

NEAX2400 ICS Business Features and Specifications
Page 96
NDA-24143, Issue 4
C-3 Call Forwarding - Don’t Answer
C-3 Call Forwarding - Don’t Answer
General Description
This feature permits a call to an unanswered station to be forwarded to a predesignated station, or to the
Attendant, when the called station doesn't answer after a predetermined time interval. If the individual Call
Forwarding - Don’t Answer timer is not assigned, the default timer assigned by system data programming
is used.
Operating Procedure
To set CALL FORWARDING - DON'T ANSWER from an individual station:
1. Lift the handset; receive Dial Tone.
2. Dial the specific CALL FORWARDING - DON'T ANSWER access code; receive Special Dial
Tone.
3. Dial the desired target station number; receive Service Set Tone.
To cancel CALL FORWARDING - DON'T ANSWER from an individual station:
1. Lift the handset; receive Dial Tone.
2. Dial the specific CALL FORWARDING - DON'T ANSWER cancel code; receive Service Set
Tone.
To set CALL FORWARDING - DON'T ANSWER from the ATTENDANT CONSOLE [A-3]:
1. Press an idle loop key.
2. Dial the specific CALL FORWARDING - DON'T ANSWER access code; receive Special Dial
Tone.
3. Dial the TENANT [T-12] number (2/3 digits).
4. Dial the originating station number.
5. Dial the desired target station number; receive Service Set Tone.
To cancel CALL FORWARDING - DON'T ANSWER from the ATTENDANT CONSOLE [A-3]:
1. Press an idle loop key.
2. Dial the specific CALL FORWARDING - DON'T ANSWER cancel code; receive Special Dial
Tone.
3. Dial the TENANT [T-12] number (2/3 digits).
4. Dial the originating station number; receive Service Set Tone.
To assign individual Call Forwarding - Don’t Answer timer to each station:
1. Use the ADAI command:
a.) Parameter NAT139 overrides SYS-1, Index 139 of ASYD
b.) Parameter NAT140 overrides SYS-1, Index 140 of ASYD
c.) Parameter NAT141 overrides SYS-1, Index 141 of ASYD
d.) Parameter NAT247 overrides SYS-1, Index 247 of ASYD
2. Timer assigned to called party is valid.
Service Conditions
1. This feature may be set and cancelled by either the station user or the Attendant.