NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 155
Call Waiting - Answer - D
term
C-27D
C-27D Call Waiting - Answer - D
term
General Description
This service feature allows a D
term
user to answer a CAMPED-ON [A-1] or CALL WAITING [C-12, 31] call
while putting an existing call on HOLD [C-6], by pressing the “ANS” key.
Operating Procedure
CAMP-ON [A-1] or CALL WAITING [C-12, 31] to a busy D
term
is activated:
1. The station user hears Camp-On Indication Tone or Call Waiting Tone during a call in progress;
the LCD of the D
term
displays:
Trunk/Station Number
D
term
Series E
Trunk/Station Number
D
term
Series E
2. The user presses “ANS” key and is connected to the waiting call.
3. To return to the original call, the D
term
user re-presses “ANS” key.
Service Conditions
1. Service conditions are essentially the same as those of CALL WAITING - TERMINATING [C-12]
for ordinary telephone sets.
2. Pressing “RCL” will disconnect the party presently engaged in conversation.
Interactions
1. This feature is allowed whenever the destination telephone set is engaged in any state other
than:
a.) engaged in a 3-way connection,
b.) a Privacy feature is activated,
c.) connected to a route programmed to have Line/Trunk, Privacy, CDN 44:PRV,
CMP
(Time Display)
XXXXXX
CAMP ON
XXXXXX
(Time Display)
CW
(Time Display)
XXXXXX
C WAIT
XXXXXX
(Time Display)
To Next Page
Loading...
