NEC NEAX 2400 ICS - Call Forwarding - Override

NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 153
Call Forwarding - Override C-26
C-26 Call Forwarding - Override
General Description
This feature allows a target station user (Station A) to call the station (Station B) which has set CALL
FORWARDING - ALL CALLS [C-5] to it. If the called station (Station B) has set the CALL
FORWARDING - BUSY LINE [C-2] to the calling station (Station A), the calling station (Station A) hears
Busy Tone and can activate CALL BACK [C-1], EXECUTIVE RIGHT-OF-WAY [E-1], or CALL
WAITING - ORIGINATING [C-31].
Operating Procedure
No manual operation is require.
Service Conditions
1. This service feature is allowed to all stations in the NEAX2400 ICS, except the ATTENDANT
CONSOLE [A-3]. The Attendant can use BV.
2. Any station that has set CALL FORWARDING - ALL CALLS [C-5] can activate any feature, if the
station is allowed the feature via CLASS OF SERVICE [C-15].
3.
(Series 6300 software enhancement)
When this feature is activated, the D
term
LCD displays
as shown below:
Transferred
Station
Transferring Transferred
Station Station
Note:
The D
term
Series E displays TRANSFER, other D
term
s display XFR in this space.
4.
(Series 6300 software enhancement)
When Station “A” (D
term
) calls Station “B” (D
term
), or if
Station “A” places an incoming call into HOLD condition and calls Station “B”, each D
term
LCD
displays as shown in the following illustrations:
Note:
These displays are available only when Station “B” has set CALL FORWARDING - ALL CALLS [C-11].
Dialed Number Called Station
XFR 4501 4501
Station A
(4567)
Indicates Station B has been set Call
Forwarding - All Calls to Station A.
(Note)
XFR 4501 4567
Station B
(4501)
Indicates Station B has been set
Call Forwarding - All Calls to
Station A.
(Note)
FWD XXXX XXXX
(Time Display)
Station A