NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 373
Night Connection - Flexible N-2
N-2 Night Connection - Flexible
General Description
This feature provides arrangements to route calls, usually directed to the ATTENDANT CONSOLE [A-3],
instead to a preselected station on a flexibly assignable basis within the system, when the night mode has
been entered.
Operating Procedure
1. Answering the operation is the same as that for NIGHT CONNECTION - FIXED [N-1].
2. Each evening, before placing the ATTENDANT CONSOLE [A-3] into the Night Connection
mode, the Attendant programs CALL FORWARDING - ALL CALLS [C-5] from the fixed NIGHT
CONNECTION - FIXED station to the desired station.
Service Conditions
1. The NIGHT CONNECTION - FLEXIBLE station may be programmed from either the
ATTENDANT CONSOLE [A-3] or the NIGHT CONNECTION - FIXED [N-1] station. Refer to
CALL FORWARDING - ALL CALLS [C-5] for details.
2. NIGHT CONNECTION - FLEXIBLE: Arrangements are provided to route calls, normally directed
to the Attendant, to a preselected station line within the system when Night service is activated.
Additionally, incoming calls from specific non-DID exchange network trunks can be arranged to
route to the specific station line. The routings can be assigned on a flexible basis by the
Attendant or NIGHT FIXED station by use of the Call Forwarding feature and remain in effect
until changed. For NIGHT CONNECTION - FLEXIBLE to function, a NIGHT CONNECTION -
FIXED station number must be assigned to the trunk via the MAT [M-18]. In the event of a power
failure, the assignments are not lost. The TAS [T-8] answering capability is provided for Night
calls not assigned to Night stations.
To Next Page
Loading...
