NEC NEAX 2400 ICS - E-4 D Exclusive Hold - D Term

NEAX2400 ICS Business Features and Specifications
Page 240
NDA-24143, Issue 4
E-4D Exclusive Hold - D
term
E-4D Exclusive Hold - D
term
General Description
This service feature allows a station user to place a call on hold and to exclude all other station users from
retrieving the held call.
Operating Procedure
While a call is in progress:
1. Press the “HLD” key twice; the LCD displays:
Held Station or Trunk
D
term
Series E
2. To return to the held call, press the held line key; the conversation is reestablished.
Service Conditions
1. EXCLUSIVE HOLD - D
term
may be activated from any line appearing on a D
term
.
2. After EXCLUSIVE HOLD has been set, the user can make or answer calls from any other line
appearing on the D
term
.
3. Only the D
term
that sets EXCLUSIVE HOLD may retrieve the held call.
4. After a variable programmable period of time, the held call will enter AUTOMATIC RECALL [A-
8] regardless of the status of the D
term
. Ringing, however, is disabled while DO NOT DISTURB
- D
term
[D-11D] is activated.
5. The LCD of other D
term
stations on which the held line appears will be lit steadily.
6. Two-Party Hold is not available when a D
term
is engaged in a 3-party conference with a station
and/or trunk.
7. The held station is denied the following services:
ATTENDANT CAMP-ON WITH TONE INDICATION [A-1]
ATTENDANT OVERRIDE [A-7]
BOSS-SECRETARY OVERRIDE - D
term
[B-5D]
BUSY VERIFICATION [B-3, B-9]
CALL WAITING - ORIGINATING [C-31]
CALL WAITING - TERMINATING [C-12]
EXECUTIVE RIGHT-OF-WAY [E-1, E-1D]
EHD
(Time Display)
XXXX
E_HOLD
XXXX
(Time Display)