NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 183
Call Hold - Conference C-146
C-146 Call Hold - Conference
(Series 6100 software feature)
General Description
This feature allows a station user to establish a conference connection by adding a third party who is held
on a multiline of a D
term
to the existing two-party connection. The held call which is to be added may be
a station or trunk call.
Operating Procedure
To operate from a D
term
:
1. Make a trunk/station call using line A on the D
term
.
2. Place the in-progress call on hold.
3. Place or answer a call using line B on the D
term
.
4. Press the XFR key.
5. Enter an access code for Call Hold - Conference and line number of line A.
6. Three-party conference is established.
To operate from other D
term
:
1. Make a trunk/station call using line A on D
term
1.
2. Place the in-progress call on hold.
3. Place or answer a call using line B on D
term
2.
4. Press the XFR key on D
term
2.
5. Enter an access code for Call Hold - Conference and line number of line A.
6. Three-party conference is established.
Line A Line B
D
term
D
term
1
D
term
2
Line A Line B
To Next Page
Loading...
