NEC NEAX 2400 ICS - D-90 D; Delayed Ringing - D Term

NEAX2400 ICS Business Features and Specifications
Page 224
NDA-24143, Issue 4
D-90D Delayed Ringing - D
term
D-90D Delayed Ringing - D
term
General Description
This feature allows a D
term
to receive an incoming ringing signal after a predetermined time.
Operating Procedure
No manual operation of the feature is required after it has been programmed in System Data.
1. In Boss/Secretary service, a call terminating on the boss's line first rings at the secretary's
station. If the secretary does not answer within a preprogrammed time, the boss' station will also
ring.
This service is convenient when many lines terminate on a secretary's phone, and the secretary
is engaged in a call, or is temporarily away from the phone, and cannot answer the call
terminated to the boss's station.
2. Calls terminated to the boss's station may be routed to multiple secretaries by assigning timing
delays for ringing to each secretary's station.
When a call to the boss' station is received, it rings on Secretary A's station. If it is not answered in a
preprogrammed time, it will also ring on Secretary B's station. If Secretary B does not answer within the
second preprogrammed time, the call will also ring on Boss's station.
An incoming call:
Indication
Boss’s station Secretary’s station
Ringing
After a preprogrammed time:
Boss Boss
Ringing
Ringing
Boss Boss
An incoming call: Ringing Indication
Indication
Boss Boss Boss
After the first preprogrammed time: Ringing Indication
Boss Boss Boss
Ringing
Boss Boss Boss
Ringing
Ringing Ringing
Secretary A Secretary B Boss’s Station
Secretary A Secretary B Boss’s Station
After the second preprogrammed time:
Secretary A Secretary B Boss’s Station