NEAX2400 ICS Business Features and Specifications
Page 428
NDA-24143, Issue 4
P-59 Personal Ringer
P-59 Personal Ringer
(Series 6200 software feature)
General Description
This feature provides distinctive ringing pattern for station/tie line incoming calls to My Line of the D
term
.
When this feature is effective, the following ringer patterns are used.
•
Station/Tie Line incoming call to My Line: Ringer Pattern 5
•
Station/Tie Line incoming call to Sub Line: Ringer Pattern 1
•
C.O. Line incoming calls to My Line/Sub Line: Ringer Pattern 0
Operating Procedure
No manual operation is required.
Service Conditions
1. This feature is available for Series 6200 software or later.
2. When a station/tie line incoming call is forwarded with an operator/station assistance, ringer
pattern is determined according to Service Feature Class of the forwarded station.
3. When a My Line of another D
term
station is assigned to a Sub Line, Ringer Pattern 5 is used for
station/tie line incoming calls to the Sub Line. Accordingly, ringer of the Sub Line must be set to
OFF.
4. This feature is available for the D
term
stations (i.e. not available for an analog station or virtual
line).
5. Ringer Pattern 0 is used for C.O. line incoming call regardless of this feature.
Interactions
Even if a station/tie line incoming call is forwarded by Station Hunting-Terminal [S-9]/Circular [S-7] or
Uniform Call Distribution [U-1], ringer pattern is determined according to Service Feature Class of the
forwarded station.
To Next Page
Loading...
