NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 157
Call Forwarding - All Calls - Outside C-28
C-28 Call Forwarding - All Calls - Outside
General Description
This feature allows a call, which originates from a station or trunk and is destined for a station, to be routed
to another station outside the NEAX2400 ICS via the appropriate trunk line. This service feature can also
be activated from a D
term
multi-line.
Operating Procedure
To set CALL FORWARDING - ALL CALLS - OUTSIDE:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - ALL CALLS - OUTSIDE access code (same as CALL
FORWARDING - ALL CALLS [C-5]); receive Special Dial Tone.
3. Dial the desired target telephone number (or Speed Calling access code and abbreviated code).
If the ATTENDANT CONSOLE [A-3] is setting this feature, dial the access code, tenant number,
originating station number, and then the desired outside number; receive Service Set Tone.
To cancel CALL FORWARDING - ALL CALLS - OUTSIDE:
1. Lift the handset; receive Dial Tone.
2. Dial the CALL FORWARDING - ALL CALLS - OUTSIDE cancel code, (same as CALL
FORWARDING - ALL CALLS [C-5] cancel code); receive Service Set Tone.
To set CALL FORWARDING - ALL CALLS - OUTSIDE from a multi-line D
term
:
1. Press the multi-line feature key to be used for CALL FORWARDING - ALL CALLS - OUTSIDE
2. Lift the handset or press the “SPKR” key; receive Dial Tone.
3. Press CALL FORWARDING - ALL CALLS - OUTSIDE feature key; receive Special Dial Tone.
4. Dial the desired target telephone number (or Speed Calling access code and abbreviated code);
receive Service Set Tone. The LED will light. The LCD displays:
D
term
Series E:
5. Replace the handset or press the “SPKR” key.
To monitor CALL FORWARDING - ALL CALLS - OUTSIDE from a multi-line D
term
:
1. Press the multi-line appearance, then press the CALL FORWARDING - ALL CALLS “FWD”
feature key. The LCD displays:
Outside Number*
FWD SET
(Time Display)
FORWARD SET
(Time Display)
FWD
(Time Display)
XXXXXXXX
To Next Page
Loading...
