NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 249
Flash Entry - D
term
F-4D
F-4D Flash Entry - D
term
General Description
This feature allows a D
term
station user to insert a switchhook flash as the first digit in a stored SPEED
CALLING-ONE TOUCH-D
term
[S-26D] or SPEED CALLING - ONE TOUCH - D
term
[S-32D] number.
Operating Procedure
To add a flash to a stored SPEED CALLING-ONE TOUCH-D
term
[S-26D] number to a D
term
:
1. Stay on-hook.
2. Press a SPEED CALLING-ONE TOUCH-D
term
[S-26D] key; the LCD display will either be blank
or a display of previously stored digits.
3. Press RCL key as first digit; a switchhook flash is entered into the memory and the LCD displays:
D
term
Series E
4. If a feature access code is to follow the flash, dial the desired digits.
5. Press the SPEED CALLING-ONE TOUCH-D
term
[S-26D] dial button; the LCD displays:
D
term
Series E
To add a flash to a stored SPEED CALLING - ONE TOUCH [S-32D] number to a D
term
:
1. Stay on-hook.
2. Press the “FNC” key and the SPEED CALLING - ONE TOUCH [S-32D] key; LCD will either be
blank or display previously stored digits.
3. Press the “RCL” key as the first digit; a switchhook flash is entered into the memory and the LCD
displays:
!
(Time Display)
!
(Time Display)
SPD SET
(Time Display)
SPEED SET
(Time Display)
(Time Display)
!
To Next Page
Loading...
