NEC NEAX 2400 ICS - L-6 D Last Number Called - D Term

NEAX2400 ICS Business Features and Specifications
Page 290
NDA-24143, Issue 4
L-6D Last Number Called - D
term
L-6D Last Number Called - D
term
General Description
This feature allows the user of a D
term
to store the last five numbers dialed, and to redial the numbers by
pressing the “LNR/SPD” key. With this feature, the D
term
user can choose any destination out of the latest
5 calls that have been stored in the memory of the system, thus enabling the user to place a call without
redialing the full number.
Operating Procedure
1. How to check the dialed numbers stored in the memory (up to 5 destinations):
a.) Press the LINE/SPD key on a D
term
.
• The Prime Line lights green.
• The Speaker Lamp lights green.
• Receive Dial Tone from the speaker with the following display on the D
term.
.
D
term
Series E
b.) Press the LINE/SPD key on the D
term
again.
• The Prime Line lights green.
• The Speaker Lamp lights green.
• Receive Dial Tone from the speaker with the following display on the D
term
.
D
term
Series E
Note:
The indication on the display is changed in sequence by pressing the LINE/SPD key. Once the stored
telephone number display reaches “LNR[#]/SPD[ ]-5”, “LNR[#]/SPD[ ]-1” appears again by pressing the
LINE/SPD key.
LNR [#] / SPD [_ _] - 1
811625643
LNR [*] / SPD [_ _ _] - 1
811625643
MIC FDB FDN >>>
LNR [#] / SPD [_ _] - 2
25191
LNR [*] / SPD [_ _ _] - 2
25191
MIC FDB FDN >>>