EasyManua.ls Logo

NEC NEAX 2400 ICS - Off-Hook Alarm

NEC NEAX 2400 ICS
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NEAX2400 ICS Business Features and Specifications
Page 388
NDA-24143, Issue 4
O-6 Off-Hook Alarm
O-6 Off-Hook Alarm
General Description
This feature allows a station user to call the Attendant or a predetermined station by simply staying OFF-
HOOK. The calling number is automatically displayed at the ATTENDANT CONSOLE [A-3] or a D
term
series with a display.
Operating Procedure
To operate:
1. Lift the handset and stay off-hook.
2. After a predetermined time elapses (2 to 30 sec.), the call will terminate at the ATTENDANT
CONSOLE [A-3] or the predetermined station.
3. The calling station number will be displayed at the ATTENDANT CONSOLE [A-3] or D
term
when
answered.
Service Conditions
1. Predetermined timing interval is programmable through the MAINTENANCE ADMINISTRATION
TERMINAL [M-18] (MAT) (2 to 30 seconds).
2. In the night mode, an OFF-HOOK ALARM call directed to the ATTENDANT CONSOLE [A-3] will
not terminate at the ATTENDANT NIGHT TRANSFER [A-19] predetermined night station. The
caller will receive a Reorder Tone.
3. A station will be assigned as a member of an OFF-HOOK ALARM group and will be connected
to the predetermined stations that are assigned for each off-hook group.
4. Maximum number of OFF-HOOK ALARM groups is 7 per-TENANT [T-12] group. A group
number must be assigned to all the stations to be included in a group.
5. The station assigned as a terminating station of each OFF-HOOK ALARM group can be a
member of a HUNTING GROUP [S-7, 8, 9].
6. This service is programmed via System Data. Stations may be restricted from using this feature
in CLASS OF SERVICE - INDIVIDUAL [C-15].
7. The ATTENDANT CONSOLE [A-3] can answer by pressing EMG key, which must be assigned
by the MAT [M-18]. Using the ANSWER key will not give priority to the OFF-HOOK ALARM call.
8. The predetermined target station can set CALL FORWARDING - ALL CALLS [C-5] and CALL
FORWARDING - BUSY LINE [C-2].
9. When the predetermined station is busy, the OFF-HOOK ALARM call receives Ringback Tone
until the station becomes idle.
10. This feature cannot be applied while in CONSULTATION HOLD - ALL CALLS [C-17] or CALL
HOLD [C-6] mode.
11. When an OFF-HOOK ALARM call is directed to a Pilot station of a UCD [U-1] group, queuing is
not available when all the stations within the group are busy.

Table of Contents

Other manuals for NEC NEAX 2400 ICS

Related product manuals