NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 377
Non-square Line Assignment - D
term
N-8D
N-8D Non-square Line Assignment - D
term
General Description
This service feature allows the line function buttons on the D
term
set to be freely assigned as line keys or
as service feature keys. These assignments are done on a per-station basis.
Operating Procedure
Key designations are assigned via the Maintenance Administration Terminal (MAT) [M-18].
Service Conditions
Programming one feature to more than one key will not provide enhanced service. For example, two
“MSG” keys will not provide a D
term
set with eight message memories. See MESSAGE REMINDER -
D
term
[M-19D].
To Next Page
Loading...
