NEAX2400 ICS Business Features and Specifications
Page 448
NDA-24143, Issue 4
S-2 Special Dial Tone
S-2 Special Dial Tone
General Description
This feature provides a distinctive Dial Tone to a station user after the switchhook has been pressed,
enabling the user to activate a specific service feature.
Operating Procedure
To operate:
1. While connected with the first party, station user presses the switchhook; receives SPECIAL
DIAL TONE.
2. User may activate a service feature, such as:
CALL HOLD [C-6]
CALL TRANSFER-ALL CALLS [C-11]
Service Conditions
1. SPECIAL DIAL TONE rating is 350/440 Hz at 240 IPM.
2. If dialing is not initiated within 12 seconds after receiving SPECIAL DIAL TONE, Reorder Tone
will be sent to the station. If the station has not gone back on hook or initiated dialing after 30
seconds of Reorder Tone, the station will be placed in the LINE LOCKOUT [L-3] mode.
3. If a station user attempts CALL FORWARDING - ALL CALLS [C-5], -BUSY LINE [C-2] - DON’T
ANSWER [C-3], etc., SPECIAL DIAL TONE will be sent to that station after access code dialing.
Interactions
1. No other programming is required. This tone is generated for momentary pressing of the hooking
feature applications.
2. LINE LOCKOUT [L-3]: SPECIAL DIAL TONE is sent for 12 seconds, Reorder Tone for 30
seconds, followed by Line Lockout.
To Next Page
Loading...
