NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 369
Message Waiting Indication - D
term
M-85D
M-85D Message Waiting Indication - D
term
General Description
This feature allows Message Waiting (MW) information to be displayed on the lower line (16 digits) of the
LCD.
Note:
The D
term
(multifunction terminal) must be equipped with a 2 or 3 line LCD display.
Operating Procedure
No manual operation is required.
Service Conditions
1. The LCD displays the following information, when MESSAGE WAITING INDICATION - D
term
is
activated:
D
term
Series E
2. When this service is assigned to a D
term
with a 1-line LCD, the service is not available, and the
display remains unchanged.
3. This service can be controlled via MAT command program.
4. This service is available only when OAI service is not available (SYS1, INDEX=79, b6=1). When
OAI service is available (SYS1, INDEX=79, b6=0), the information cannot be displayed on the
lower line of LCD, but will be displayed on the upper line.
5. While Message Waiting information control is being executed to a D
term
equipped with a 2-line
LCD by this service, time information is not displayed on the LCD. When Message Waiting
information control is cancelled, the time information display is resumed.
6. This service is not provided for a D
term
equipped with 1-line LCD.
Initial Display
(Time Display)
0 0: 0 0 AM MON
01
MW
When controlled by
MCI, Attendant or
station
0 0: 0 0 AM MON
01
MW
To Next Page
Loading...
