NEC NEAX 2400 ICS - Page 150

NEAX2400 ICS Business Features and Specifications
Page 120
NDA-24143, Issue 4
C-7D Call Pickup - Group - D
term
C-7D Call Pickup - Group - D
term
General Description
This feature permits a station user to answer any call directed to another line in his preset Call Pickup
Group by using a programmable line/feature key.
CALL PICKUP - GROUP - D
term
may be used by seizing Dial Tone from any multi-line appearance on the
D
term
.
(Series 6200 software enhancement)
A station user can be assigned to an additional CALL PICKUP
GROUP, referred to as EXPANDED CALL PICKUP GROUP.
Operating Procedure
To answer an incoming call:
1. A station within the Call Pickup Group rings.
2. Lift the handset; receive Dial Tone.
3. Press the “CALL PICKUP - GROUP” feature key; the call is connected to the station. The LCD
displays:
Called Station Called Station Trunk
D
term
Series E
To answer an incoming call CALL HOLD [C-6]:
1. A station within the Call Pickup Group rings.
2. Press the “XFR”/”HLD” feature key; receive Special Dial Tone.
3. Press the Call Pickup Group feature key; the call is connected to the station.
4. The first party is put on CALL HOLD [C-6] status.
(Series 6200 software enhancement)
To pickup an incoming call within the EXPANDED CALL PICKUP
GROUP:
1. A station within the EXPANDED CALL PICKUP GROUP rings.
2. Lift the handset; receive Dial Tone.
3. Dial the access code or press the feature key for EXPANDED CALL PICKUP; the call is
connected to the station.
Service Conditions
1. A station assigned a fully restricted CLASS OF SERVICE-INDIVIDUAL [C-15] will be unable to
answer incoming Central Office calls using this feature.
2. A CALL PICKUP GROUP-D
term
is defined as those stations having the ability to pick up other
station’s calls using the CALL PICKUP feature.
PCK XXXX XXXX
(Time Display)
PICKUP XXXX XXXX
(Time Display)