NEC NEAX 2400 ICS - Page 249

NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 219
Dial Intercom D-87
Operating Procedure (cont’d)
D
term
Series E
2. A three-party conference is established. The called stations may hear a Warning Tone. The
option for hearing the tone is preassigned in System Data. The called and calling D
term
s display:
D
term
Series E
3. If Intercom Bridge service is denied, the D
term
displays:
D
term
Series E
PRIME LINE PICK UP-D
term
[P-13D]:
The D
term
may be programmed to seize the incoming call on the AUTOMATIC, MANUAL, or DIAL
INTERCOM lines before the Prime Line. If two incoming calls terminate simultaneously to both the Prime
Line and the DIAL INTERCOM line, when the station user goes off-hook, PRIME LINE PICKUP-D
term
[P-
13D] will seize the DIAL INTERCOM line before the Prime Line. If only the Prime Line is ringing when the
station user goes off-hook, then PRIME LINE PICKUP D
term
[P-13D] will seize the Prime Line.
The programmable options and ringing priority are illustrated in the following table:
Ringing Priority
Programmable Options
PRI0 PRI1 PRI2 PRI3 PRI4
1 Prime Line Dial Intercom
Automatic
Intercom
Manual
Intercom
Automatic
Intercom
2 -- Prime Line Prime Line Prime Line
Manual
Intercom
3 --------Prime Line
OVERRIDE
XX
(Time Display)
CNF
(Time Display)
CONF
(Time Display)
CNF RST
(Time Display)
CONF REST
(Time Display)