NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 247
FX Access F-2
Interactions (cont’d)
6. When the system is in the night mode of operation, incoming FX calls can be answered using
NIGHT CONNECTION - FIXED [N-1], FLEXIBLE [N-2] or TRUNK ANSWER FROM ANY
STATION [T-8] feature.
7. DIRECT INWARD DIALING [D-8] is not provided for FX trunks. All calls are normally routed to
the Attendant, UCD group, or a CAS Attendant.
8. Outgoing FX trunk calls can be restricted from preselected stations by the assignment of one or
more of the following restrictions:
a.) Restriction from Outgoing Calls
b.) Miscellaneous Trunk Restrictions
c.) Toll Restriction
9. FX CO Access: This service provides access to a distant CO via FX trunks. All incoming calls to
the system (from the FX, CO area) are placed to the listed FX directory number and are
answered by the Attendant in a similar way to Listed Directory Number (LDN) service. Outgoing
calls are made on an Attendant-handled basis or on a dial access basis by stations.
10. A unique Attendant Console INCOMING CALL IDENTIFICATION (ICI) [I-2] may be displayed for
each local and FX LDN.
11. A unique Attendant Console trunk group busy lamp may be assigned to indicate the busy/idle
status for an FX trunk group.
12. The COT circuit packages are used to provide the trunk interface circuit.
13. An FX route may be used with any other feature available to any other route, including:
DIRECT OUTWARD DIALING [D-9]
REMOTE ACCESS TO SYSTEM [R-2]
TRUNK-TO-TRUNK CONNECTION [T-10]
TRUNK ANSWER FROM ANY STATION (TAS) [T-8]
TOLL RESTRICTION-3/6 DIGIT [T-7]
To Next Page
Loading...
