NEAX2400 ICS Business Features and Specifications
Page 312
NDA-24143, Issue 4
M-4 Multiple Console Operation
Interactions
1. See ATTENDANT CONSOLE [A-3] for information regarding a single Attendant Console and
system features provided to the Attendant Consoles. The Attendant Console must first be
provided.
2. For each tenant, only one type of Attendant Console system can be assigned, either normal or
Master Attendant Console system.
3. ASAT must be programmed for INTER-POSITION TRANSFER [I-5].
4. When more than one Attendant Console is installed, a Master Attendant Console may be
assigned (AMAT command). This Attendant Console will control the implementation of DAY/
NIGHT CLASS OF SERVICE [D-15].
5. If the Master Attendant places the system into “Night” mode, the Night LED on the other consoles
do not light.
To Next Page
Loading...
