NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 413
Paging Transfer P-10
Interactions (cont’d)
5. PAGING TRANSFER OPERATION: Station A is connected to Party B. Station A momentarily
presses the switchhook or presses XFR key (if D
term
phone) and then dials the PAGING
TRANSFER (MEET-ME PAGE) route access code. When connected to the page, Station A
requests Station C to dial the MEET-ME PAGE answer code. Station A hangs up. When station
C dials the answer code, Party B is connected to Station C. Station A is removed from the
connection.
6. If Station C does not call the MEET-ME PAGE answer code after 30 seconds, Party B rings back
to Station A. This timer can be changed by ASYD System Data 1 Index 74 b0~b3.
7. Stations allowed Priority Page, SFI = 57, will barge into the paging route, except when the
Attendant Console is paging.
8. To answer PAGING TRANSFER while connected to another party, CALL HOLD [C-6] must be
used. THREE-WAY CALLING [T-2] may not be established.
9. A station must be assigned a Route Restriction Class that allows access to the routes involved
in the PAGING TRANSFER.
To Next Page
Loading...
