NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 421
Privacy Release P-18
Operating Procedure (cont’d)
5. Station A receives Ringback Tone, and the LCD displays:
D
term
Series E
6. A 4-party call is established. The line appearance will flash, indicating I-USE [I-8], and the LED
of PRIVACY key will be turned off. The LCDs of the associated D
term
s display:
D
term
Series E
By following the operations described, a maximum 8-party call can be established.
To restrict a station from overriding an 8-party call:
1. Station A presses line appearance of Station B, which is engaged in an 8-party call. The LCD of
Station A displays (for 10 seconds):
D
term
Series E
Service Conditions
1. PRIVACY RELEASE is available for a D
term
connected to a station or trunk.
2. PRIVACY RELEASE is not available when one of the stations in communication is a single line.
3. Single line stations cannot bridge into the busy connection.
4. This feature is available when the PRIVACY key is pressed to establish PRIVACY RELEASE.
5. A station has to be in one of the following states to set PRIVACY by pressing either PRIVACY
key or P-RLS key:
a.) Connected to station or trunk,
b.) Engaged in a maximum 7-party call.
However, PRIVACY cannot be set when the overriding party has already received Ringback Tone.
CNF WAIT
(Time Display)
CONF WAIT
(Time Display)
CNF
(Time Display)
CONF
(Time Display)
CNF RST
(Time Display)
CONF REST
(Time Display)
To Next Page
Loading...
