NEAX2400 ICS Business Features and Specifications
Page 452
NDA-24143, Issue 4
S-3D Speed Calling - System - D
term
Service Conditions (cont’d)
2. Each abbreviated call code can store a maximum of 24 digits, including access codes and
pauses.
3. The standard number of speed calling numbers stored in the system SIM (ICS), IMG
x
, IMG
xh
,
IMG
dxh
, MMG/UMG (ICS) and UMG
x
is 1000.
4. Speed calling numbers are programmed via System Data from the MAINTENANCE
ADMINISTRATION TERMINAL (MAT) [M-18].
5. Stations may be denied access to SPEED CALLING-SYSTEM-D
term
via CLASS OF SERVICE-
INDIVIDUAL [C-15] assignment in System Data. SPEED CALLING SYSTEM [S-3] may be
allowed or denied on either a station or tenant-wide basis.
6. TOLL DENIAL/TOLL DIVERSION [T-6] and TOLL RESTRICTION-3/6-DIGIT [T-7] may or may
not be applied to SPEED CALLING-SYSTEM-D
term
, depending on preference.
7. LEAST-COST ROUTING-3/6-DIGIT [L-5] may be provided via SPEED CALLING-SYSTEM
access.
To Next Page
Loading...
