EasyManua.ls Logo

NEC NEAX 2400 ICS - Page 513

NEC NEAX 2400 ICS
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Page 483
Service Feature Peg Count S-27
Service Conditions (contd)
16. SPEED CALLING ACCESS-STATION [S-21] count: Number of times a variable abbreviated
number is dialed by the stations for which the feature is allowed.
17. SPEED CALLING ACCESS-GROUP [S-23] count: Number of times a variable abbreviated
number is registered by stations for which the feature is allowed.
18. TRUNK ANSWER FROM ANY STATION (TAS) [T-8] count: Number of times the TAS Answer
code is dialed by stations for which the feature is allowed.
19. OFF-HOOK QUEUING [O-7] count: Number of times an extension accesses an outgoing trunk
via OFF-HOOK QUEUING after initially encountering a condition where all outgoing trunks are
busy. The extension must actually access a trunk in order for the count to be incremented.
20. ON-HOOK OUTGOING QUEUING-ENTRY [O-2] count: Number of times an extension
accesses the ON-HOOK OUTGOING QUEUING function by dialing access or going on-hook (if
automatic queuing is provided) after initially encountering a condition where all outgoing trunks
are busy. The count will be incremented each time the function is accessed, even if the queuing
request is cancelled before a trunk is accessed.
21. ON-HOOK OUTGOING QUEUING [O-2] cancel count: Number of times ON-HOOK QUEUING
is cancelled by dialing the cancel code.
22. CONSULTATION HOLD-ALL CALLS [C-17] count: Number of times CONSULTATION HOLD is
executed.
23. CALL TRANSFER-ALL CALLS [C-11] count: Number of times a call is transferred to another
extension before the called party answers, without Attendant involvement. A call originated
internally or from the outside will be registered in the count.
24. THREE-WAY CALLING [T-2] count: Number of times THREE-WAY CALLING occurs without
Attendant assistance.
25. The maximum Tenant Number Counting SERVICE FEATURE PEG COUNT is as follows:
IMG (ICS), IMG
x
: 15 tenants
IMG
xh
, IMG
dxh
, MMG (ICS), UMG (ICS), UMG
x
: 63 tenants
Note:
Additional hardware is required.

Table of Contents

Other manuals for NEC NEAX 2400 ICS

Related product manuals