NEAX2400 ICS Business Features and Specifications
Page 504
NDA-24143, Issue 4
S-129 SMDR Output Expansion - ANI/CPN
Service Conditions (cont’d)
4. Regarding the ANI information identifier numbers 2, 3, 4 and 5, the information sent from Central
Office are output.
Note:
The ANI information identifier numbers have the following meanings:
0 = Not output
1 = Display
2 = Not display
3 = Not provide service
4 = Outgoing C.O. call
5 = Service Condition
5. When an office receiving a calling number from Central Office extends the call to another office
through CCIS and charging is performed at the extended office, the maximum calling number is
16 digits. However, only when ANI information identifier sent from Central Office is 1 (Display),
the calling number is output.
6. This service is available when using CENTRALIZED BILLING – CCIS [C-55]. (A main office
receives charging information from its remote office as it received. However, if the main office
makes this service invalid, the information in the expanded area is not output but transferred by
using current identifiers (outgoing: KA, incoming: KE, both station: KB).
The following table shows the relationship between a main office and a remote office when remote
charging is established.
7. This service is not supported in offices performing remote charging.
Transfer format
from a
remote office
Current transfer format
Expanded transfer format by
activating this service
Output format
from a
main office
•
Series 6100 software is
used.
•
This service is activated.
Expanded area information ID is
output only. Information is
output in space.
Information is output in the
expanded format according to
system data of the main office.
In case information required to
be output at a main office is not
in the transfer format from a
remote office, information is
output same as the current
transfer format.
•
Series 6100 software is
used.
•
This service is not activated.
Information is output in the
current format.
Information in the expanded
area is not output but
transferred in the current
format.
•
A main office is not
remodelled
Information is output in the
current format.
Information from a remote office
must be transferred in the
current format.