NEC NEAX 2400 ICS - Page 86

NEAX2400 ICS Business Features and Specifications
Page 56
NDA-24143, Issue 4
A-125 Analog Caller ID (Class SM)
Service Conditions (cont’d)
• *1 In case of the ID display in ISDN service, the sub address is displayed.
When the D
term
does not receive data pertaining to the sub address or Caller ID, the blank
is displayed.
• *2 If the prior display is not assigned by system data, the other is displayed.
b.) The calling number and name displays may be exchanged by depressing the function
key, according to the conditions below:
• When my line is the prime line, displays may be exchanged whether during termination
or conversation.
• When my line is not the prime line, displays may be exchanged only during
conversation.
c.) When the received numbers of a calling number and characters of a calling name
exceed the display field, whether to put them close to the right or left may be chosen by
system data. At this time an asterisk (*) is indicated on the exceeded digit position.
d.) The display during termination is flashing and during conversation, it is lit.
e.) The followings are the examples of displays when the received numbers of a calling
number and characters of a calling name exceed the display field.
The 2-line LCD displays:
or
or
or
Calling number
1 2 3 4 5 6 7 *
A B C D E F G H I J K L M N O *
Calling name
Calling number
* 4 5 6 7 8 9 0
* L M N O P Q R S T U V W X Y Z
Calling name
Calling name
A B C D E F G *
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 *
Calling name
Calling name
* T U V W X Y Z
* 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
Calling name