EasyManua.ls Logo

NEC PD78052 - B.3 Debugging Tools; B.3.1 Hardware; Debugging Tools; Hardware

NEC PD78052
603 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
585
APPENDIX B DEVELOPMENT TOOLS
IE-78K0-NS
Note
In-circuit Emulator
IE-70000-MC-PS-B
Power Supply Adapter
IE-70000-98-IF-C
Note
Interface Adapter
IE-70000-CD-IF
Note
PC Card Interface
IE-70000-PC-IF-C
Note
Interface Adapter
IE-780308-NS-EM1
Note
Emulation Board
NP-80GC
Emulation Probe
EV-9200GC-80 Conversion
Socket
(refer to Figure B-2)
NP-80GK
Emulation Probe
TGK-080SDW
Conversion Adapter
(refer to Figure B-3)
B.3 Debugging Tools
B.3.1 Hardware (1/2)
(1) When using in-circuit emulator IE-78K0-NS
An in-circuit emulator to debug hardware and software when developing
application systems that use the 78K/0 Series. Supports integrated debugger
(ID78K0-NS). Used in combination with a power supply unit, emulation
probe, and interface adapter to connect to the host machine.
An adapter to supply voltage from AC100 to 240-V outlet.
An adapter required for using a PC-9800 series computer (except notebook-
type personal computer) as the host machine for the IE-78K0-NS.
A PC card and an interface cable required for using PC-9800 series
notebook-type personal computer as the host machine for the IE-78K0-NS.
An adapter required when using an IBM PC/AT and compatible as the host
machine for the IE-78K0-NS.
A board to emulate peripheral hardware peculiar to the device. Used in
combination with an in-circuit emulator.
A probe to connect an in-circuit emulator and a target system.
For 80-pin plastic QFP (GC-3B9, GC-8BT type)
A conversion socket to connect the board of a target system that is
designed to mount 80-pin plastic QFP (GC-3B9, GC-8BT type) and the
NP-80GC.
The
µ
PD78P054KK-T, 78P058KK-T, and 78P058YKK-T (ceramic WQFN)
can be mounted instead of connecting NP-80GC.
A probe to connect an in-circuit emulator and the target system.
For 80-pin plastic TQFP (GK-BE9 type).
A conversion adapter to connect the board of a target system designed to
mount 80-pin plastic QFP (GK-BE9 type) to the NP-80GK.
Note Under development
Remarks 1. The NP-80GC and NP-80GK are products of Naito Densei
Machidaseisakusho Co., Ltd.
Contact: Naito Densei Machidaseisakusho Co., Ltd (Tel: (044)822-3813)
2. The TGK-080SDW is a product of TOKYO ELETECH Corporation.
Contact: Daimaru Kogyo Co., Ltd.
Tokyo Electronic Component Department (Tel: (03)3820-7112)
Osaka Electronic Component Department (Tel: (06)244-6672)
3. The TGK-080SDW is sold singly.
4. The EV-9200GC-80 is sold in a set of five.

Table of Contents

Related product manuals