UX5000 IP Terminal Features
7 - 20 IP Terminal Features
10.1 Setup
1. Make sure the IP terminal has firmware 92.2.2.0 or higher installed.
2. Download the sample Screen Saver zip file from the NEC Technical
Support Site (www.necux5000.com).
This file contains the XML file to be edited/saved as well as sample
graphics for each of the IP terminals: IP-CTS, Enhanced, Value.
3. Unzip the sample Screen Saver zip file.
4. Move the SCR folder into the C:\INETPUB\wwwroot folder on the server
PC which is used for the XML applications.
◆ The INETPUB folder is created when the IIS service is installed as part
of the XML setup. Refer to the XML Software Application Manual, P/N
0193220, for further details on the initial XML setup.
5. Move the desired graphic for the Screen Saver into the image directory
(C:\INETPUB\wwwroot\scr\image).
6. Move the Scrsvr.xml file from the SCR folder within the
C:\INETPUB\wwwroot folder and place it in the root of the wwwroot folder.
◆ The final directory path should look like this:
To Next Page
Loading...
