ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
8-16 Network and System Management
v1.0, April 2010
To delete one or more SNMP configuration entries:
1. In the SNMP Configuration table on the SNMP screen, select the check box to the left of the
entry that you want to delete, or click the Select All table button to select all entries.
2. Click the Delete table button.
Managing the VPN Firewall’s SNMP System Information
The following VPN firewall identification information is available to an SNMP manager: system
contact, system location, and system name.
To modify the SNMP identification information:
1. Select Administration > SNMP from the menu. The SNMP screen displays (see Figure 8-4
on page 8-15).
2. Click the SNMP System Info option arrow at the top right of the screen link. The SNMP
SysConfiguration screen displays.
3. Modify any of the information that you want the SNMP manager to use. You can edit the
system contact, system location, and system name.
4. Click Apply to save your settings.
Figure 8-5
To Next Page
Loading...
