ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
2-12 Connecting the VPN Firewall to the Internet
v1.0, April 2010
2. Click the Edit button in the Action column of the WAN interface for which you want to
automatically configure the connection to the Internet. The WAN ISP Settings screen displays
(see Figure 2-7 on page 2-9, which shows the WAN1 ISP Settings screen as an example).
3. Locate the IPS Login section on the screen.
In the ISP Login section, select one of the following options:
• If your ISP requires an initial login to establish an Internet connection, select Ye s. (The
default is No.)
• If a login is not required, select No and ignore the Login and Password fields.
4. If you selected Yes, enter the login name in the Login field and the password in the Password
field. This information is provided by your ISP.
5. In the ISP Type section of the screen, select the type of ISP connection that you use from the
three listed options. By default, Other (PPPoE) is selected, as shown in Figure 2-10.
Figure 2-9
Figure 2-10
To Next Page
Loading...
