4.17 File operation
FRA5087
e) RENAME … To change the file name
Entry of new file names
Select NEW NAME (changed file name) by using the ITEM
key and then press
the OPEN key, when the list of file names is displayed. Select characters from the
TABLE to correctly form a new file name up to the external identifier (extension), and press
the ENTER key to define the new file name. The new file name will be displayed to the
right of NEW NAME.
Entry of file names to be changed and change of file names
Select the file name that you want to rename (current file name) by using the ITEM
key. Press the function key [RENAME] to execute the change of the file name.
f) EJECT … USB flash drive removal
Before removing USB flash drive from FRA5087, be sure to press the function key
[EJECT] and check that the USB flash drive is not accessed, by, for instance, confirming
that the access lamp is off.
Be warned that an attempt to remove the USB flash drive without pressing the EJECT
button or to remove the USB flash drive when being accessed may destroy the unusable
USB flash drive.
Those file names that involve Japanese language or those long file names
exceeding eight alphanumeric characters + three extensions cannot correctly be
displayed due to mutilation. In addition, these files cannot be deleted nor
renamed.
Subdirectories cannot be treated. In addition, they cannot be deleted nor
renamed.
Press the [EJECT] button and make sure that the access lamp for the USB
flash drive goes off before removing the USB flash drive.
To Next Page
Loading...
