NF WF1946B - Page 95

4.2 Sweep
WF1946B 4-29
(2) Set sweep TYPE to FREQ
① Use the
and keys to produce the following display (TYPE flashes).
ＦＲＥＱ ＡＭＰＴＤ ＯＦＦＳＥＴ
4
Ｆ－ＳＷＰ：ＴＹＰＥ ＳＯＵＲＣＥ ＭＯＤＥ
4
② Press the
ENTER
key, then use the and keys to produce the following display (FREQ
flashes).
ＦＲＥＱ ＡＭＰＴＤ ＯＦＦＳＥＴ
4
Ｆ－ＳＷＰ：ＴＹＰＥ ＳＯＵＲＣＥ ＭＯＤＥ
4
③ This completes setting the sweep type to frequency. Press the
EXIT
key once to release the
setting mode.
(3) Select the sweep FUNCTION
① Use the
and keys to produce the following display (FUNCTION flashes).
ＬＩＮ
Ｆ－ＳＷＰ：
3
ＦＵＮＣＴＩＯＮ ＳＴＡＲＴ ＳＴＯＰ
4
② Press the
ENTER
key.
③ Press the
key, then select with the
MODIFY
dial
④ After selecting, press the
EXIT
key once to release the function select mode.