NF WF1946B - Page 96

4.2 Sweep
4-30 WF1946B
(4) Set the START frequency
① Use the
and keys to produce the following display (START flashes).
１０００．００００００００ Ｈｚ
Ｆ－ＳＷＰ：
3
ＦＵＮＣＴＩＯＮ ＳＴＡＲＴ ＳＴＯＰ
4
② Press the
ENTER
key.
③ Set the frequency with the keypad or
MODIFY
dial.
For example, set to 100 Hz.
④ After setting, press the
EXIT
key once to release the start frequency setting mode.
(5) Set the STOP frequency
① Use the
and keys to produce the following display (STOP flashes).
１００００．００００００００ Ｈｚ
Ｆ－ＳＷＰ：
3
ＦＵＮＣＴＩＯＮ ＳＴＡＲＴ ＳＴＯＰ
4
② Press the
ENTER
key.
③ Set the frequency with the keypad or
MODIFY
dial.
For example, set to 200 Hz.
④ After setting, press the
EXIT
key once to release the stop frequency setting mode.