Nikon DTM-330 - 2-1) PT-PT Inverse; Cogo

3-84
3
MENU/2: Cogo
2) Cogo
Coordinate Geometry Calculations
Press the [2] key on the MENU screen to
display the COGO menu screen.
This function can be used at any time
from observation or inputting PT screens.
2-1) PT-PT Inverse
Calculating Angle and Distance between two Coordinates
Press the [1] key in the COGO menu to
display the screen for inputting the first
point number/name. Type the PT and
press the [ENT] key.
Type the second point number/name and
press the [ENT] key.
The azimuth, horizontal distance, and
vertical distance from the first point to the
second point are displayed.
Press the [ESC] or [ENT] key to return to
the COGO menu.
ｒＨＡ：１２３°２４’１０”
ｄＨＤ： １２３ ．４５６９ｍ
ｄＶＤ： １３．１４５７ｍ
ＣＯＧＯ１／２
When you press [ENT] without having any point name/number in the
PT field, it shows a coordinate input screen anyway. This coordinate
will NOT be stored in the database. If you want to record the point, you
need to specify a new point name/number.
Ｉｎｐｕｔ １ｓｔ Ｐｏｉｎｔ
ＰＴ：
■
ＣＯＧＯ
1
Ｉｎｐｕｔ ２ｎｄ Ｐｏｉｎｔ
ＰＴ：
■
ＣＯＧＯ
1
Ｃｏｇｏ
１：ＰＴ－ＰＴ ４：Ｌｉｎｅ
２：ＨＡ＋ＨＤ ５：Ｉｎｐｕｔ
３：Ａｒｅａ
1