Nikon DTM-330 - Sett

3-89
3
MENU/3: Sett
3) Sett
Initial settings
Press the [3] key on the MENU screen to
display the initial settings menu.
Menu Item Conditions
VA zero direction
0 (Zenith)/ 0 (Horizon)
＜ Angle Resolution ＞
High/Low
＜ Tilt compensation ＞ *
Dual/Single/OFF
HA to BS
AZ(Azimuth)/zero
1:Angle
*When the “Tilt adj.” setting is set to “OFF” or “Single”, some of
the tilt-compensation-free items are displayed after “#” sign
instead of “:” indication.
１：Ａｎｇｌｅ ５：Ｕｎｉｔ
２：Ｄｉｓｔ ６：Ｃｏｍｍ ．
３：Ｃｏｏｒｄ．７：Ｓ－Ｏ
４：Ｐｏｗｅｒ ８：Ｏｔｈｅｒ
１
＞ＶＡ ｚｅｒｏ ：↑０
ＡＮＧ Ｒｅｓｏ ：Ｈｉｇｈ
Ｔｉｌｔ ａｄｊ．：Ｄｕａｌ
ＨＡ ｔｏ ＢＳ ：ＡＺ
･The items shown in a box (ex. VA zero direction ) in “Conditions”
column are Job Settings that cannot be changed in the existing Job.
･When any of those Job settings is changed, a confirmation screen is
shown to ask you to create a new Job with those new settings or just
continue working under those settings without recording data.