Nikon DTM-330 - Measurement Mode Settings

3-19
3
MSR/TR
K
3) Measurement mode settings
Holding down the [MSR] or [TRK] key
for one second shows the measurement
settings for each key.
Move the cursor by the up/down arrow
keys and use the right/left arrow keys to
change the setting.
Target = Prism/Sheet
Prism constant (Const) = –999~999mm
Mode = Prec/Normal
AVE = 0 (Continuous) ~ 99
“ －－－ ”(for Prism) or “ ） ） ）”(for Sheet) is displayed during the
measurement depending on the Target setting.
＞
Ｔａｒｇｅｔ ：Ｐｒｉｓｍ
Ｃｏｎｓｔ ： ３０ｍｍ
Ｍｏｄｅ ：Ｐｒｅｃ
ＡＶＥ ：２
In order to apply better cyclic error adjustment in distance measurement,
the 'Target' setting is introduced. It efficiently eliminates multi-path
reflection.