2-1
2
PREPARATION
2. PREPARATION
2-1 Unpacking and Packing the Instrument
y Handle gently the instrument to guard against shocks or excessive
vibration.
y Encase the instrument with the battery pack attached.
Unpacking
Hold the carrying-handle and take the
instrument out of the case. The instrument is
placed in its carrying case as shown in the
figure.
Packing
Direct the telescope downward and align the
storage mark (t) on the upper plate and the
mark (t) on the leveling base clamp knob.
Fasten lightly the clamp knobs and then
replace the instrument in its case.
)
To Next Page
Loading...
