3-12
3
List displays
List Displays
You will see the same type of “list” display in View/Edit data
(MENU/4:Data), Code List function, Qcode Edit (HOT/5:Qedit), and Job
manager (MENU/1:JOB).
There are some common rules to operate this “list”.
“＞” on the first line shows the current
cursor place.
“↓” on the lower right corner means that
there are more pages after this page.
When you see this sign, you can use the
Right/Left arrow key to page up or down
the list.
Press the Up/Down arrow key moves cursor one by one. To pick up one
record from the list, press the [ENT] key after you move the cursor to the
desired record.
In some cases, the [Mode] key is also available on this “list” screen to
activate a sub-function menu.
ＵＰ，５０２
ＵＰ，５０３
ＵＰ，５０４，ＣＥ
ＵＰ，５０５ ↓
To Next Page
Loading...
