Nikon DTM-330 - 2-2) HA+HD Coordinate

3-85
3
MENU/2: Cogo
Press the [DSP] key to change the
contents of the result screen.
Gd: Grade (HD/VD)
V%: 100/Gd
rSD: Slope distance PT1 to PT2
2-2) HA+HD Coordinate
Calculating Coordinates from Angle and Distance
Press the [2] key in the COGO menu to
display the screen for inputting the base
point. Type the PT and press the [ENT]
key.
Input the azimuth, horizontal distance,
and vertical distance from the base point
and then press the [ENT] key.
The coordinates are calculated and
displayed. Press the [4] or [ENT] key to
record the point.
The “Input Point” screen is displayed to
record the point. The PT is defaulted to
the “Last recorded PT + 1”.
Press the [ENT] key to store the point.
Ｇｄ： ６．２０：１
Ｖ％： １０ ．５００ ％
ｒＳＤ： １４４ ．６７２２ｍ
ＣＯＧＯ２／２
Ｉｎｐｕｔ Ｐｏｉｎｔ
ＰＴ：
■
ＣＯＧＯ
1
Ｘ： －１５４．２０１９
Ｙ： ２３４５．３６２７
Ｚ： １３５ ．３２５０
Ａｂｒｔ ＲＥＣ
Ｉｎｐｕｔ Ｐｏｉｎｔ
ＰＴ：１６
ＣＤ：ＢＵＳＨ
Ｌｓｔ Ｓｔｋ
Ｉｎｐｕｔ ＡｎｇｌｅＤｉｓｔ
ＨＡ：１２３ ．４５２０
■
ＨＤ：
ｄＶＤ：
1