3-93
3
MENU/3: Sett
Menu Item Conditions
8:Other
(1
st
screen)
(Continued to the next page)
＜
Store Data
＞
RAW/XYZ/Both
･When recording SS/CP/SO
records on the BMS or S-O, it
records raw and/or coordinate
data based on this setting
.
＜
Beep on Signal
＞
ON/OFF
＜Secondary Unit＞*
None/Metre/US-Ft/I-Ft
＜XYZ Disp＞
Fast/Norm/Slow/+ENT
･This defines the speed to
change to the next screen
after showing coordinates
of input PT.
* When the Secondary unit is set to other than “NONE”, one
more display for HD/VD/SD in the 2
nd
Unit will be added to the
Basic Measurement Screen, Stakeout and 2-pt Reference Line.
* For “US-Ft” and “I-Ft” setting, there is an option to
display the value in Ft-Inch.
Ｄｉｓｐｌａｙ ｏｐｔｉｏｎ
ｄｅｃｉｍａｌ－Ｆｔ
Ｓｔｏｒｅ ＤＢ：Ｂｏｔｈ
Ｓｉｇ Ｂｅｅｐ：ＯＦＦ
２ｎｄ Ｕｎｉｔ：ＮＯＮＥ
ＸＹＺ Ｄｉｓｐ：Ｆａｓｔ ↓
To Next Page
Loading...
