Nikon DTM-330 - Page 154

4-5
4
CHECKING AND ADJUSTMENT
<DTM-330>
The tilt indication is V-tilt only. The
header is
“Tilt:” instead of “X:” and “Y:”.
Procedure to execute calibration is the
same as DTM-350.
When any of ACV, ACH, X, or Y
is out of range (X,Y, ACV>±3’ or
ACH>±30” ), “OVER” is shown.
Pressing any key to return to the
first observation screen.
Ｘ： ９０″ Ｙ： －１５″
ＡＣＶ： ＯＶＥＲ
ＡＣＨ： １０″
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
Ｔｉｌｔ： ８″
ＡＣＶ： ＯＶＥＲ
ＡＣＨ： ０°００′４０″
Ｐｒｅｓｓ ａｎｙ ｋｅｙ