Nikon DTM-330 - 2) When searching point

8-2
8
ERROR MESSAGES AND ACTIONS
When the coordinate value is more than
13 digits, it shows an error.
Action: Press any key to return to the
previous screen.
The input point number/name which is
going to be recorded exists in the current
Job.
Action : Press any key to return to the
point input screen.
When you record a shot to an existing
point from the BMS or Stakeout, delta
coordinate information is shown.
[1:Abrt]/[ESC]=returns to the PT input screen.
[2:XYZ]=appends RAW and update XYZ data.
[4:RAW]=only records RAW data.
2) When searching point:
There is no point matching the condition
you entered.
Action : Press any key to return to the
point input screen.
！ＰＴ Ｎｏｔ Ｆｏｕｎｄ
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
This can be shown from any functions, such as Station setup or
Stakeout when the PT/CD is input.
！Ｄｕｐｌｉｃａｔｅ ＰＴ
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
ＯＶＥＲ ＲＡＮＧＥ
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
ｄＸ： －０．０１５０
ｄＹ： ０．００８４
ｄＺ：
Ａｂｒｔ ＸＹＺ ＲＡＷ