Nikon DTM-330 - Page 30

3-2
3
Disp & Func
Key Summary for
detail
Turns the Power ON and OFF.
p.3-14
Turns the Backlight ON and OFF.
When held down for over one second, it shows a setting
screen for: 1:Backlight, 2:Sound ON/OFF.
p.3-28
Displays MENU items: 1:JOB, 2:COGO, 3:Sett, 4:Data,
5:Comm., 6:Time, 7:Calib. ,8:Note.
Also, a sub-function menu such as DEL/Edit/Add can be
shown by this key in JOB and Data.
p.3-78
Changes the key input mode between alpha-numeric ( ),
numeric ( ) and Lst/Stk for inputting PT or CD.
Also, the Qcode mode can be activated by this key on the
Basic Measurement Screen (BMS).
p.3-23
Records measurement data.
Holding this key for a second from the BMS, enables to
record data as CP record instead of SS.
In the numeric input mode ( ), enters a decimal point or
minus sign.
In the alpha-numeric input mode ( ), enters (.), +, -.
p.3-64
Returns to the previous screen.
In the numeric or alpha-numeric input mode, clears the
input data.
Starts measurement based on the measure mode settings
for the MSR key and displays the result.
Holding down this key for a second displays its measure
mode settings (Target, Prism Const., Mode and AVE).
In the numeric input mode ( ), enters 1.
In the alpha-numeric input mode ( ), enters A, B, C, 1.
p.3-17
When there are two or more display screens, switches
between them.
To change the combination of the display items on
DSP1/4, 2/4 and 3/4 (same as S-O3/8, 4/8 and 5/8),
holding down this key for a second.
In the numeric input mode ( ), enters 2.
In the alpha-numeric input mode ( ), enters D, E, F, 2.
p.3-20
PWR
MENU
MODE
A
1
1
A
．
－
＋
REC
○
－
・
ESC
○
MSR
1 ○
A
B
C
1
A
1
A
DSP
2 ○
D
E
F