EasyManua.ls Logo

Nokia 7705 - Page 438

Nokia 7705
538 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Management
438
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
detail — displays detailed information about the specified PTP clock. This command
only applies when the clock-id parameter value is 1 to 16.
standby — displays PTP information about the standby CSM. This command only
applies when the clock-id parameter is defined as csm.
statisticsdisplays statistics information. This command only applies when the clock-
id parameter is defined as csm.
summary — displays summary information. This command only applies when the clock-
id parameter value is 1 to 16.
timestamp — displays PTP packet timestamp information. This command only applies
when the clock-id parameter value is 1 to 16.
unicast — displays IP unicast negotiation information. This command only applies when
the clock-id parameter value is 1 to 16.
Output The following outputs are examples of PTP clock information:
PTP clock CSM summary information (Output Example, Table 45)
PTP clock summary information (Output Example, Table 46)
PTP clock information (Output Example, Table 47)
PTP clock timestamp information (Output Example, Table 48)
Output Example
A:# show system# ptp clock csm
===============================================================================
IEEE 1588/PTP Clock Information
===============================================================================
-------------------------------------------------------------------------------
Local Clock
-------------------------------------------------------------------------------
Clock Type : ordinary,slave PTP Profile : IEEE 1588-2008
Domain : 0 Network Type : sdh
Admin State : down Oper State : down
Announce Interval : 1 pkt/2 s Announce Rx Timeout: 3 intervals
Clock Id : 4cc94ffffe737123 Clock Class : 255 (slave-only)
Clock Accuracy : unknown Clock Variance : ffff (not computed)
Clock Priority1 : 128 Clock Priority2 : 128
PTP Port State : disabled Last Changed : 10/28/2015 18:48:31
PTP Recovery State: disabled
Frequency Offset : n/a
-------------------------------------------------------------------------------
Time Information
-------------------------------------------------------------------------------
Timescale : Arbitrary
Current Time : 2015/11/02 15:51:44.8 (ARB)
Frequency Traceable : no
Time Traceable : no
Time Source : internal oscillator
===============================================================================
A:# show system#

Table of Contents

Other manuals for Nokia 7705

Related product manuals