4-2. ABSOCODER Sensor Specifications
The ABSOCODER sensor specifications are as shown below.
The VS-12PB is compatible with either the multi-turn or linear type ABSOCODER sensor.
4-2-1. Multi-Turn Type MRE Sensor (2-phase)
Model
□
□□
φ
φ
[Travel amount per turn]×[number of turns]
Total number of divisions
-2
・
・
Moment of inertia
・
-5
・
・
2
3.9×10
-6
kg・m
2
(4.0×10
-5
kgf・cm・s
2
)
Permissible shaft load
Permissible mechanical speed(RPM)
2.0×10
2
m/s
2
(20G) 200Hz, up/down 4h, forward/back 2h (conforms to JIS D1601 standard)
IP52f (conforms to JEM 1030 standard)
-
+
-
+
Maximum extension
cable length
4-2-2. Multi-Turn Type MRE Sensor (3-phase)
Model
□
φ
φ
[Travel amount per turn]×[number of turns]
Total number of divisions
-2
・
・
Moment of inertia
・
-5
・
・
2
3.9×10
-6
kg・m
2
(4.0×10
-5
kgf・cm・s
2
)
Permissible shaft load
Permissible mechanical speed(RPM)
Vibration resistance
200Hz, up/down 4h, forward/back 2h (conforms to JIS D1601 standard)
IP52f (conforms to JEM 1030 standard)
Ambient
-
+
-
+
Maximum extension
3S-RBT 100m